Charcoal powder as a pass-through

Can be placed without any problems despite the warning message. (This is due to the signs.) Front attachment: Front attachment Rear machine: Rear machine Adapter: Adapter Consists of the following individual modules: 4-Compartment Charcoal Module 4-Compartment Charcoal Module Front module (Exactly like the rear machine, but with a central conveyor belt). Module: Standalone Modularity: Second component Automatically buys logs. Base values: You will need to calculate these based on your conveyor belt and processing skill. 4 circular saws with bench changers. Total = 2 x 60 (120/min) 2 circular saws per side (base value per side: 2 x 30/min wooden boards = 60/min) In-house charcoal powder requirement: One side (60/min) 1a Kiln (2 melting pots = 15/min each) (Total: 30/min) 1b Kiln (2 melting pots = 15/min each) (Total: 30/min) Machine Total 2 x 60/min (Total: 120/min) Minus the in-house requirement per side with the kilns "Calculated" One side: 21. 3/min (17. 0 p/sec) Remaining 38. 7/min which goes into the double box. "2 x 19. 35 /min" Measured with sandbox Portal 18-19 min. 4x Initial Furnace Fuel on the sides. General Information: If your subscription date is older than the last update, please (Unsubscribe and resubscribe). You can find the reason for this in my guide. I make every effort to indicate when something changes to the blueprint. Gelatin blockers are helpful and must be introduced manually. I always try to include an internal bank in my blueprints, set to 1 silver coin, and access points for initial starts or similar modifications. - Green chests with a candle on them are money inlets with a conveyor belt and a chest for manual filling. - Green chests without a candle are initial start materials. (I will change the naming if possible.) - Red chests are material outputs. For your own workshop content, feel free to check out my guide here. ``` Overwriting existing blueprints in the workshop (workaround) Link: DE Overwriting existing blueprints in the workshop O